![background image](http://html.mh-extra.com/html/zenith/pro895x/pro895x_installation-and-setup-manual_929557004.webp)
3276-A
P A G E 4
Installer’s Experience Level
The PRO895X is a sophisticated Entertainment
Machine
TM
. In addition to making the necessary
connections, installation will most likely require
a series of adjustments to ensure the projected
image is not distorted. If these adjustments are not accu-
rate, the operation of the PRO895X could be adversely
affected. For this reason, installation and setup should be
performed by a qualified service person and should con-
form to all local codes. The installer must also adhere to
the pertinent Articles of the National Electrical Code (NEC),
pertinent Regulations of the Federal Communications
Commission (FCC), and all relevant codes of local regulat-
ing agencies.
Installation Considerations
Before you install the PRO895X...
Ventilation --
Proper ventilation keeps the
PRO895X running cool. Air circulates through
perforations on the sides of the cabinet. Do not
block these vents or you will shorten the life of
the PRO895X.
Power Cord --
The PRO895X has a three-wire
grounding-type plug having a third (grounding)
pin. This plug will only fit into a grounding-type
power outlet.
This is a safety feature. If you are unable to insert the
plug into the outlet, contact an electrician to replace the
obsolete outlet. Do not defeat the safety purpose of the
grounding-type plug.
Power Source --
The PRO895X is designed to
operate on standard current, 120 volt 60 Hertz
AC or 230 volt 50/60 Hertz AC. Do not attempt
to operate it on DC current.
The PRO895X is configured at the factory for 120 volt, 60
Hz operation. A service adjustment is necessary to permit
the unit to operate on 230 volt, 50/60 Hz. See Changing
From 120 VAC To 230 VAC in the Setup and Alignment sec-
tion for details.
National Power Cord Requirements U.S. / Canada
• The power cord must be UL listed and CSA certified.
• The minimum specifications for the power cord are as
follows: No. 18 AWG, Type SV or SJ, 3 conductor.
• The power cord must have a rated cur-
rent capacity of at least 10 amperes.
• The attachment plug must be an
earth-grounding type with a NEMA 5-15P
(15A, 125V) or NEMA 6-15P (15A, 250V)
configuration.
Other Countries
• The cord set fittings must bear the
certification mark of the agency responsible for evaluation
in a specific country. Acceptable agencies include the fol-
lowing:
BSI (United Kingdom)
Nemko (Norway)
CEBEC (Belgium)
OVE (Austria)
DEMKO (Denmark)
SEMKO (Sweden)
EANSW (Australia)
SEV (Switzerland)
SETI (Finland)
UTE (France)
IMQ (Italy)
VDE (Germany)
KEMA (The Netherlands)
MITI (Japan)
• The flexible cord must be of a HAR (harmonized) type
HO5VV-F 3-conductor cord with a minimum conductor size
of .03 square inches (1.0 square millimeter).
• The cord set must have a current capacity of at least 10
amperes and a nominal voltage rating of 125 or 250 VAC, as
required by the specific country’s power system.
INSTALLATION OVERVIEW
Entertainment Machine
TM
is a registered trademark of Zenith Electronics Corporation
Standard North
America (120 VAC)
North America
(240 VAC)
Содержание PRO895X
