background image

206-03777

2

RECORD YOUR MODEL NUMBER 

(Now, while you can see it)

The model and serial number of your Entertainment

Machine    are located on the back of the TV cabinet. For

your future convenience, we suggest that you record

these numbers here:

MODEL

NO.____________________________________

SERIAL

NO.____________________________________

WARNING :

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). 

NO USER SERVICEABLE PARTS INSIDE. 

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert

the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure

that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the pres-

ence of important operating and maintenance (servicing) instructions in the literature accom-

panying the appliance.

WARNING :

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE. 

NOTE TO CABLE/TV INSTALLER:

This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of

the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and,

in particular, specifies that the cable ground shall be connected to the grounding system of

the building, as close to the point of the cable entry as practical.

REGULATORY INFORMATION:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-

able protection against harmful interference when the equipment is operated in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful inter-

ference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following mea-

sures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION:

Do not attempt to modify this product in any way without written authorization from Zenith

Electronics Corporation. Unauthorized modification could void the user’s authority to operate

this product. The responsible party for this product’s compliance is :

Zenith Electronics Corporation, 

2000 Millbrook Dr., 

Lincolnshire, IL 60069, USA

1-847-941-8000

WARNING

RISK OF ELECTRIC SHOCK
        DO NOT OPEN

“Entertainment Machine   ” is a trademark of Zenith Electronics Corporation

TM

TM

Содержание L15V26





























































Отзывы: