Zenith IQD61W20, Руководство по эксплуатации

Страница: 31 / 72

P A G E 3 1 206-3674
GUIDE Plus+ System Connection
Locate the jack marked G-LINK.
This jack is for the IR
Cord connection. Insert the
connector into the G-LINK.
Place the other end of the
cords with the IR (Infrared)
emitter sending units in
front of your VCR and Cable
Box in such a way as to
allow for an unrestricted
path for the IR signals to be
able to reach the front pan-
els of the VCR and Cable Box.
If necessary, peel off the
green protective strips from
the front and back of the IR
emitter to hold emitter in
proper location.
1
2
IR emitter
IR emitter
IR receiver
IR receiver
VCR
G-LINK
Cable Box
17
In order to receive the GUIDE
Plus+ signal, it is necessary to
connect your TV through the
Antenna/Cable #1 jack on the rear
of the TV.
RGB IN
R
L
G-LINK
T