background image

The Crestron® TSW-UMB-70 series provides mounting brackets and
preconstruction mounting kits for TSW-70 series touch screens.

l

The

TSW-UMB-70

universal mounting bracket is used to install a

TSW-70 series touch screen into existing drywall or paneling. The
bracket is also suitable for use in a lectern or podium.

l

The

TSW-UMB-70-PMK

preconstruction mounting kit is used along

with a TSW-UMB-70 to install landscape TSW-70 series touch screens
in preconstruction applications. The mounting kit permits fastening to
the left or right hand stud of a framed wall prior to installing drywall.

l

The

TSW-UMB-570P-PMK

provides the same functionality as the

TSW-UMB-70-PMK for portrait TSW-70 series touch screens.

This document describes installation procedures for each listed model.

In the Box

1

TSW-UMB-70, TSW-UMB-70-PMK, or TSW-UMB-570P-PMK
Mounting Brackets and Kits

Additional Items

TSW-UMB-70 Only

2

Screw, 6-32 x 1/2 in., Phillips (2007240)

1

Template, Cutout (4531683)

Install the TSW-UMB-70

Use the included cutout template to ensure that the correct dimensions
are retained during installation. The template provides dimensions for
installing the TSW-UMB-70 horizontally (for the TSW-570, TSW-770, and
TSW-1070) or vertically (for the TSW-570P).

CAUTION: 

Allow an air gap of at least 12 in. (305 mm) in the wall cavity

above and below the TSW-UMB-70 to ensure proper heat dissipation.

1

TSW-UMB-70 Series

Quick Start

Mounting Brackets and Kits for TSW-70 Series

Содержание TSW-UMB-70 Series

Страница 1: ...e same functionality as the TSW UMB 70 PMK for portrait TSW 70 series touch screens This document describes installation procedures for each listed model In the Box 1 TSW UMB 70 TSW UMB 70 PMK or TSW UMB 570P PMK Mounting Brackets and Kits Additional Items TSW UMB 70 Only 2 Screw 6 32 x 1 2 in Phillips 2007240 1 Template Cutout 4531683 Install the TSW UMB 70 Use the included cutout template to ens...

Страница 2: ...ine to cut an opening into the surface using an appropriate drywall saw 4 Loosen the two screws on the TSW UMB 70 assembly but do not remove them 5 Install the assembly into the opening bottom first For portrait installations install the assembly into the opening left side first with the TOP text on the assembly to the right 6 Reach into the assembly and push the rear half back so that it is behin...

Страница 3: ...d below the PMK to ensure proper heat dissipation For preconstruction applications use standard drywall nails or screws to attach the PMK to a wall stud as shown in the following illustrations Attach the TSW UMB 70 PMK Attach the TSW UMB 570P PMK For postconstruction applications 1 Use the PMK as a cutout template by turning it to face the mounting surface 2 Confirm the PMK is level then use finis...

Страница 4: ...n com legal patents Certain Crestron products contain open source software For specific information visit www crestron com opensource Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics Inc in the United States and or other countries Other trademarks registered trademarks and trade names may be used in this document to refer to either the entities ...

Отзывы: