Zenith HydroTap B100, Инструкция по установке и эксплуатации

Страница: 9 / 20

Zenith Hydro Tap Installation and Operating Instructions - 81467 - February 2005 Page 9 of 20
Operating the Tap
Blue Chilled Water Light
On all the time:
This indicates that the chilled water temperature is within the usable range.
Flashing slowly :
This indicates that the chilled water is not at the right temperature. Wait up to
20 minutes.When the chilled water is ready, the light will stop flashing.
Note: The Zenith HydroTap is designed to dispense chilled water in the temperature
range 5°C to 10°C.
During heavy usage, the temperature can rise out of this range.
Red Boiling Water Light
On all the time:
This indicates that the boiling water is ready.
Flashing slowly :
This indicates that the boiling water is below usable temperature.
Filter Change Light Off:
This indicates the filter is operating within its normal specified lifespan.
Filter Change Light Flashing slowly :
The light will flash slowly when the filter is due for replacement and the LCD will
show “Filter Change”. Refer to "Replacing the filter" section of this document.
Boiling Water Lever
Depressing the “Red” lever allows dispensing of boiling water. Pulling up the
Red lever allows the tap to operate in a “no-touch” mode. Water will flow for a
maximum time of 15 seconds. To reset, return the handle to the “Off” position
and repeat the step. The lever has to be manually returned to the “Off” position.
Chilled Water Lever
Depressing the “Blue” lever allows dispensing of chilled water. Pulling up the
Blue lever allows the tap to operate in a “no-touch” mode. Water will flow for a
maximum time of 15 seconds. To reset, return the handle to the “Off” position and
repeat the step. The lever has to be manually returned to the "Off" position.
Child Proof Lock (boiling / chilled models)
The child proof lock can be activated to prevent boiling water flowing if the hot
lever is inadvertently activated.
To activate
, first press the safety button then
depress the Blue chilled water lever for a period of approximately ten seconds. The
safety lock indicator light will now be illuminated.
To de-activate
, first press the
safety button then depress the Blue chilled water lever for a period of
approximately ten seconds. The safety lock indicator light will now extinguish.
To
operate when the lock is "ON"
, depress both the Red lever and the safety button
simultaneously.
Child Proof Lock (all boiling only models except HT models)
To activate the child safety lock, go to the LCD display, using menu
∧
or
∨
scroll to
the Child Safety Lock display. To turn ON adjust
∧
to turn OFF adjust
∨
button.
After about 10 secs the screen will default to the selected mode. When activated
the LED on the safety lock will be illuminated. When de-activated the LED will be off.
Child Proof Lock (HT boiling only models)
Pressing the safety button rapidly three times will either activate or de-activate the lock.
Indicator light ON means the lock is active, indicator OFF means the lock is inactive.
Child safety Lock
Note:
On the Boiling only models
the Chilled LED is blank.