Zenith HealthView H20J55DT, Руководство по установке

Страница: 48 / 64

Page 48 206-4065
Installer Menu
Detailed Descriptions for Installer Menu Items 28-I through 56-I
28-I. CH. OVER RIDE (Channel Override)
If set to 1, the user can select channels with
either Channel Up/Down or by direct keypad entry.
If set to 0, only those channels that are entered
for scanning may be selected by direct keypad
entry. Note: If set to 0, Auto Program is locked
out; (as shown on Setup menu) channel search
is not available.
29-I. OLD OCV (On Command Video
TM
)
Set to 1 for operation with systems from On
Command Corporation.
30-I. ACK MASK
M.P.I. Communication Parameter. Leave at
default setting unless changed by Pay-Per-View
provider.
31-I. POLL RATE
M.P.I. Communication Parameter. Leave at default
setting unless changed by Pay-Per-View provider.
32-I. TIMING PULSE
M.P.I. Communication Parameter. Leave at default
setting unless changed by Pay-Per-View provider.
33-I. NOT USED
34-I. NOT USED
35-I. NOT USED
36-I. NOT USED
37-I. NOT USED
38-I. NOT USED
39-I. REAR VIDEO EN. (Rear Video Enable)
Set to 1 to enable rear AUX (Video) input.
Set to 0 to disable rear AUX input.
40-I. NOT USED
41-I. NOT USED
42-I. NOT USED
43-I. NOT USED
44-I. NOT USED
45-I. NOT USED
46-I. NOT USED
47-I. AUX STATUS
Set to 1 for M.P.I. AUX source to be reported as a
channel number instead of channel 0. Set to 0 to
disable AUX identification change.
48-I. DIS SETUP M (Disable Setup Menu)
Set to 1 to disable the Setup menu. Setup menu
will not appear. Set to 0 to enable the Setup
menu.
49-I. NOT USED
50-I. DIS VIDEO M (Disable Video Menu)
Set to 1 to disable the Video menu. Video menu
will not appear. Set to 0 to enable the Video
menu.
51-I. DIS VCHIP M (Disable V-Chip Menu)
Set to 1 to disable V-Chip menu. V-Chip menu will
not appear. Set to 0 to enable the V-Chip menu.
52-I. NOT USED
53-I. DIS CH-TIME (Disable Channel-Time OSD)
Set to 1 to disable the Channel-Time display.
Channel-Time display will not appear.
Set to 0 to enable the Channel-Time display.
54-I. EN SET COL (Enable Setup Menu Color)
Set to 1 to enable custom color settings for the
Setup menu. Set to 0 to disable custom color set-
tings for the Setup menu.
55-I. FOR SETUP M (Setup Menu Foreground
Color) Set according to Color Chart.
0 = Black 3 = Yellow 6 = Cyan
1 = Red 4 = Blue 7 = White
2 = Green 5 = Violet
56-I. BCK SETUP M (Setup Menu Background
Color) Set according to Color Chart.
0 = Black 3 = Yellow 6 = Cyan
1 = Red 4 = Blue 7 = White
2 = Green 5 = Violet
57-I. NOT USED
58-I. NOT USED
59-I. NOT USED