Page 42
206-4065
Installer
menu items can be
accessed by using the optional
installer’s remote control. Just
press and hold MENU (about 8
seconds) until the menu disap-
pears, then press 9, 8, 7, 6,
then OK (Enter). To remove the
Installer’s Menu, press
OK
repeatedly. Any changes
you
make will be stored in non-
volatile memory.
The Installer menu opens with
the main menu. Use MENU and
Up or Down ADJ to sequence
through the installer menus and
submenus. Use Up or Down
ADJ to scroll up/down within the
menus and submenus. To change
a setting, use the Left or Right
ADJ keys. Press OK to return to
the main menu.
Using the Installer Menu
Items 0-I ~ 117-I are accessible
only in the Installer Menu. Their
numbers, descriptions, ranges,
factory default settings, and a
place for listing any changes
made on site are given below
and on the following pages.
The Factory Menu that is intended
for qualified service technicians
only, is not shown. XX-F Menu
Items ( not shown here ) are
service type adjustments and only
qualified technicians
having
specialized test equipment should
access them.
INSTALLERS
INSTALLER1
INSTALLER2
INSTALLER3
INSTALLER4
INSTALLER5
INSTALLER6
INSTALLER7
INSTALLER8
TV MICRO
V3.00
D2A CARD
V3.03
D2A CARD
-
MICRO COMM
STATUS
OK
Menu Function
Value
Default
Brief Description of Function and Comments
Item
Range
Value
0-I. INSTALLER SEQ
0 - 3
0
Leave default set at 0.
1-I. POWER MANAGE
0 - 7
0
Sets number of hours of no activity before auto shutoff.
2-I. AC ON
0 / 1
0
Set to 1 to enable auto turn on at power up.
3-I. BAND-AFC
0 - 7
1
Sets Tuning band for Analog channels.
4-I.
STRT CHANNEL
0 - 255
255
Channel at turn-on (255 for last Channel). For digital
channels, use with item 101-I Start Minor Channel.
5-I. CHAN LOCK
0 / 1
0
When set to 1, cannot tune from current channel.
6-I.
GHOST CH
0 / 1
0
Set to 1 to enable Ghost Channel display.
7-I.
START VOLUME
0-63, 255
255
Volume level at TV turn-on (Set 255 to retain last level).
8-I.
MIN VOLUME
0 - 63
0
Minimum volume setting.
9-I.
MAX VOLUME
0 - 63
63
Maximum volume setting.
10-I.
MUTE DISABLE
0 / 1
0
Set to 1 to disable mute function.
11-I.
NOT USED
12-I. IR BANKS EN
0 / 1
0
Set to 1: enables TV to respond to IR codes to
change Channel Bank directly.
13-I.
SCAN MODE
0 / 1
1
Puts TV On-Off event in Channel Up/Down sequence.
14-I. STRT CH IN SM
0 / 1
0
Set to 1 to put TV on/off below start channel number.
15-I.
SLEEP TIMER
0 / 1
1
Set to 1 to enable Sleep Timer.
16-I.
EN TIMER
0 / 1
1
Set to 1 to enable Timer.
17-I.
ALARM
0 / 1
1
Set to 1 to enable Alarm.
18-I.
NOT USED
19-I.
NOT USED
20-I.
FEATURE LEVEL
0 / 1
1
Zen 1 Leave default set 1 (1 Zen1).
21-I.
V-CHIP
0 / 1
1
Set to 1 to enable V-Chip (Parental Control).
22-I.
MAX BLK HRS
0 - 99
12
Sets number of Parental Control blocking hours.
23-I.
CAPTION LOCK
0 / 1
0
Set to 1 to retain caption setting at turn off.
Installer Menu
Use the Installer Menu to set up or change operational settings.
See detailed descriptions of the Installer Menu items on the following pages
Содержание HealthView H20J55DT
Страница 60: ...Page 60 206 4065 Notes This page is available for the Installer to make notes as they relate to this TV set up ...
Страница 61: ...206 4065 Page 61 Notes This page is available for the Installer to make notes as they relate to this TV set up ...
Страница 62: ...Page 62 206 4065 Notes This page is available for the Installer to make notes as they relate to this TV set up ...
Страница 63: ...206 4065 Page 63 Notes This page is available for the Installer to make notes as they relate to this TV set up ...
