FACTORY MENU
3828VD0171G
2-13
DIGITAL FCS - FACTORY MENU
020-F PIN_AMP OFFSET
021-F UP_CPIN OFFSET
022-F LO_CPIN OFFSET
SVGA
023-F UP-BLK
024-F LO-BLK
025-F AFC_BOW: Vertical line bow adjustment. Range:
0-63, Initial value: 31.
026-F AFC_ANGLE: Vertical line slope adjustment.
Range: 0-63, Initial value: 31.
027-F V_ASPECT: Aspect control ratio. Range: 0-
63, Fixed Value: 47 for 4:3 CRT.
028-F V_SIZE: Vertical amplitude adjustment.
Range: 0-63, Initial value: 50.
029-F V_POSITION: Vertical position adjustment.
Range: 0-63, Initial value: 31.
030-F V_SCROLL: Vertical picture scroll control.
Range: 0-63, Initial value: 28.
031-F V_LIN: Vertical linearity adjustment. Range:
0- 15, Initial value: 07.
032-F V_S_CORRECTION: Vertical S correction.
Range: 0-15, Initial value: 5.
033-F UP_VLIN: Vertical linearity control. Range:
0- 15, Initial value: 0.
034-F LO_VLIN: Vertical linearity control. Range:
0- 15, Initial value: 0.
035-F H_SIZE: Horizontal amplitude adjustment.
Range: 0-63, Initial value: 43.
036-F H_POSITION: Horizontal position adjust-
ment. Range: 0-63, Initial value: 31.
037-F PIN_PHASE: Horizontal trapezoidal adjust-
ment. Range: 0-63, Initial value: 31.
038-F PIN_AMP: Pincushion adjustment. Range: 0-
63, Initial value: 31.
039-F UP_CPIN: Horizontal pin adjustment for top
edge. Range: 0-63, Initial value: 38.
040-F LO_CPIN: Horizontal pin adjustment for bottom
edge. Range: 0-63, Initial value: 34.
041-F UP_UCP: Horizontal pin adjustment for ex-
treme top edge. Range: 0-3, Initial value: 0.
042-F LO_UCP: Horizontal pin adjustment for ex-
treme bottom edge. Range: 0-3, Initial value: 0.
043-F UP_UCG: Horizontal pin gain adjustment for
extreme top edge. Range: 0-3, Initial value: 0.
044-F LO_UCG: Horizontal pin gain adjustment for
extreme bottom edge. Range: 0-3, Initial value: 0.
045-F UC_POL: Horizontal pin polarity setting
for extreme top & bottom edge. Range: 0-1, Ini-
tial value: 0.
046-F V_COMP: HV fluctuation compensation amount
setting for vertical picture size. Range: 0-15,
Initial value: 07.
047-F H_COMP: HV fluctuation compensation amount
setting for horizontal picture size. Range: 0-15,
Initial value: 07.
048-F PIN_COMP: HV fluctuation compensation amount
setting for horizontal pin distortion.Range: 0-7,
Initial value: 0.
049-F AFC_COMP: HV fluctuation compensation amount
setting for H position. Range: 0-7, Initial value: 0.
050-F RGAIN OFFSET
051-F GGAIN OFFSET
052-F BGAIN OFFSET
053-F R-CUT OFFSET
054-F G-CUT OFFSET
055-F B-CUT OFFSET
056-F SUBBRIGHT SVGA: Max value of 64d and de-
fault value of 31d for SVGA format. Depends on
factory adjustment of NTSC video format.
057-F MAXCONTRAST SVGA: Max value of 64d and
default value of 52d for 27"and 58d for 32"for
NTSC video format. This value is used in one
formula to limit the max contrast level on SVGA
format.
058-F MAXBRIGHT SVGA: Max value of 64d and de-
fault value of 35d for 27" and 54d for 32". This
value is used in one formula to limit the max
brightness level on SVGA format.
059-F OSD CONT SVGA: OSD amplitude can be con-
trolled by OSD contrast with a range of 12dB.
Default value is 7d.
