Zenith DVD-2220, Руководство пользователя

Страница: 13 / 48

CONNECTIONS PAGE 13
Connecting to a TV
Connect the DVD player to your TV
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT COMPONENT
VIDEO OUT
Y
Pr
Pb
S-VIDEO
OUT
L
1 2
R
VIDEO
OUT
S-video cable
(supplied)
To S-VIDEO OUT
(white)
L
To COMPONENT
VIDEO OUT
To AUDIO/VIDEO OUT
Audio/Video cable
(supplied)
To video input
(yellow)
To audio inputs
(red and white)
Video cable (Y, Pb, Pr) (not supplied)
To S-video input
TV or monitor with
audio video inputs
(red)
R
(yellow)
V
❍ Refer to the owner’s manual of your TV as well.
❍ When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
❍ If your television set has one audio input, connect the DVD player to a Y cable adapter (not supplied) and then connect to your
TV.
❍ Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, the playback picture will be
distorted because DVD video discs are copy protected.
Warning
Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the coaxial digital audio jack of
this DVD player to an AV decoder that has the Dolby Digital (AC-3) decoding function. High volume sound may damage your hear-
ing as well as the speakers. (Refer to “Selecting Digital Audio Output” on page 39.)
Notes
If the TV has an S-video input, connect the DVD
player with the supplied S-video cable.
The component video connections supply component signals (Y, Pb, Pr) to video
equipment equipped with component video input connections. If your TV receiver has
component video inputs, it is highly recommended that you use a component video
cable (not supplied) to obtain the full benefit of DVD’s superb picture quality. (The
picture quality obtained using component video is even better than that of S-video.)