Zenith DVD-2220, Руководство пользователя

Страница: 14 / 48

PAGE 14 CONNECTIONS
Connecting to an Audio System
You can listen to the sound of audio CDs and DVD video discs in stereo.
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT COMPONENT
VIDEO OUT
Y
Pr
Pb
S-VIDEO
OUT
L
1 2
R
VIDEO
OUT
To audio inputs
of the amplifier
(white)
(red)
Audio system
To VIDEO
OUT
To AUDIO OUT
S-video cable (supplied)
To S-VIDEO OUT
(yellow)
(red)
R
(white)
L
To video input (yellow)
To S-video input
TV or monitor with
audio/video inputs
If the TV has an S-video input, connect the DVD
player with the supplied S-video cable.
❍ Refer to the owner’s manual of your audio system as well.
❍ When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
❍ If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, move the DVD
player away from the tuner and radio.
❍ The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
❍ Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the
speakers may be damaged.
Warning
Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the coaxial digital audio jack of
this DVD player to an AV decoder that has the Dolby Digital (AC-3) decoding function. High volume sound may damage your hear-
ing as well as the speakers. (Refer to “Selecting Digital Audio Output” on page 39.)
Notes