Zenith DVB352, Инструкция по установке и эксплуатации

Страница: 16 / 28

DVD Operation
Playing a DVD
Playback Setup
Turn on the TV and select the video input source con-
nected to the DVD player.
Audio system: Turn on the audio system and select
the input source connected to the DVD player.
11
Press OPEN/CLOSE to open the disc tray.
2 2
Load your chosen disc in the tray, with the
playback side down.
• Discs can be loaded one at-a-time. Press
DISC SKIP to rotate the carousel.
3 3
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead.
If a menu screen is displayed
A menu screen may be displayed first after loading a
DVD with menus.
Use the
1 1 2 23 34 4
buttons to select the title/chapter you
want to view, then press SELECT/ENTER to start play-
back.
Press TITLE or MENU to return to the menu screen.
otes
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
“Parental Control
” , on page 15).
– DVDs may have a Region Code.
Your player will not play discs that have a Region
Code different from your player. The region code for
this player is 1 (one).
Exchanging discs during playback
Press DISC EXCHANGE on the front panel during
playback to open the disc tray.
Press DISC SKIP to rotate the disc tray. The carousel
will rotate clockwise one disc at-a-time.
Exchange the discs and press DISC EXCHANGE or
OPEN/CLOSE to close the disc tray.
ote
– The disc tray presently loaded in the play position can
not be exchanged.
Skipping discs
Press DISC SKIP during playback or in Stop mode.
otes
– When DISC SKIP is pressed, the disc tray rotates and
playback begins from the beginning of the next disc.
– If there is no disc on the next disc tray, the following
disc tray will be selected.
– When DISC SKIP is pressed during playback of disc
5, playback of disc 1 will start.
Exchanging the disc and starting playback
1. Press OPEN/CLOSE during playback or in Stop
mode.
Play stops (if pressed during playback), the disc tray opens
and the disc that was in the play position comes to the front.
2. Exchange the disc.
3. Press OPEN/CLOSE or PLAY again.
The tray closes and playback begins (with the disc
that is in front).
DVD
DVD
16
Center Position
Tray
Do not load a disc in the
left or right side position.