Zenith C32V23 - 32" Flat-Screen Integrated HDTV, Руководство по эксплуатации и гарантия

Страница: 8 / 56

206-3767
P A G E 8
Mini glossary
75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider. Each end looks like a hex shaped nut with a wire
sticking through the middle, and it screws onto the threaded antenna/cable jack on the back of your TV.
A small device that connects a two-wire 300 ohm antenna to a 75 ohm RF jack. They are usually about an inch long with two screws
on one end and a round opening with a wire sticking out on the other end.
Hook Up an Off-Air Antenna
Connect an off-air antenna
If you have a 75 ohm RF cable, then you don’t need
any adapters!
A 300 to 75 ohm adapter is not included with the TV.
300 TO 75 OHM
ADAPTER
Typical
TV Back
Flat Wire
(300 ohm)
Antenna
300/75 ohm
Adapter
ANTENNA/
CABLE 1
RF Coaxial Wire
(75 ohm)
Antenna
Typical
TV Back
ANTENNA/
CABLE 1
Locate the Antenna/Cable 1 jack on the back
of your TV.
Connect the antenna wire that runs from the
wall directly to this jack, according to one of
the diagrams to the right.
Remove the back of the remote and put in two
“AAA” batteries.
Plug in your TV. Your TV is designed to operate
on standard household current, 120-volt 60
Hertz AC. Do not plug it into an outlet con-
trolled by a switch. Do not attempt to operate
it on DC power.
Back of
Remote
120 V AC
60 Hz
1
2
3
4