Zenith C32V23 - 32" Flat-Screen Integrated HDTV, Руководство по эксплуатации и гарантия

Страница: 44 / 56

P A G E 4 4
206-3767
Mini glossary
PROGRAMMING Procedure to set up remote to operate other equipment.
PRG Programming mode key.
DEVICE CODE Code to control infra-red remote controllable electronic devices: TVs, VCRs, Cable Boxes, etc.
Verify 3-Digit Code Stored in Mode
1
2
Use the following method described below to find the code number stored in
memory for each remote operating mode: TV, VCR, CABLE, and AUX
PRG
POWER
CABLE
VCR AUX TV
SURF
-
FLASHBK MUTE
CHANNEL
CHANNEL
VOLUME
VOLUME
1 2 3
4 5 6
7
0
8
9
MENU
REWIND
F FWD
RECORD
ENTER
SIGNAL
AUDIO
CC
QUIT
SOURCE
PAUSE TIMER
PLAY
STOP
RATIO
VIDEO
2
3
Programming your Zenith remote may allow you to use one remote
to work up to 4 different devices, if all modes are programmed.
Not all devices will work with your Zenith remote control.
1
With a small blunt object, press and hold PRG for about three
seconds. When the light turns on, release PRG.
Press the mode button you want the 3-number code for, then
press the TIMER button.
The LED will blink the number of times to indicate the num-
ber of the first digit. There will be a 1 second pause during
which the LED light will be off, then the LED will blink the
number of times for the second digit of the code, and so on.
For example:
- One blink, no LED light for 1 second.
- Three blinks, no LED light for 1 second.
- Eight blinks.
This is the example for code: 1-3-8.
Note: Ten blinks indicate code number “0”.
Indicator Light
Mode / Product Compatibility
TV VCR CATV AUX
TVs VCRs Cable Boxes, All products on pp 46 - 47
DVDs Satellite Receivers
2