Zenith B19A23DCOM, Руководство по эксплуатации и гарантия

Страница: 26 / 36

206-3480 P A G E 2 6
Programming the Remote
The device you want to program
should be ON.
On the chart in this manual, find the
type of device you’re programming and
then find the brand name. Make a
note of the three-digit code—you’ll
need it soon.
Press and hold the PRG key. It’s
recessed so it doesn’t get pushed
accidentally. When the indicator light
behind the PRG button turns on, you
can release the button.
Push the button with the name of the
device you’re programming (VCR,
CABLE, TV).
Using the number pad, enter the
three digit code found on the chart
on the next page.
Press ENTER to save the code The
indicator light will flash three times
and turn off if the code was
accepted.
Aim the remote at the device and
push the POWER button. It should
turn off. If not, try the other codes
listed and continue from step three.
Note: After programming, to operate
the device you have just programmed,
press the proper Mode button first.
Programming your Zenith remote
will allow you to use one remote
to work up to 3 different devices!
Not all devices will work with your
Zenith remote control.
1
2
3
4
5
6
7
tv vcr
power
f.fwd. rew
play
stop
enter
cable
volume channel
mute
source
tv / vcr
flshbk
record
quit
CC
prg
menu
pause
3
Indicator Light
6
4
5
Program your remote to work with a vast range of A/ V devices.
7