O P E R AT I O N R E M OT E
P A G E 3 9
Using your MBR Trakball Buttons
206-3360-O
Using the
buttons on
your remote to
control your
Entertainment
Machine.
You can use most of the options on your Entertainment Machine by
pressing various buttons.
MENUS
Pressing the MENU button repeatedly will cycle you through all the
available menus that control your Entertainment Machine’s settings.
Once in a menu, you can select an item by pressing the UP/DOWN
arrows to highlight one. Then, to modify that option, you can choose
it by pressing a RIGHT/LEFT arrow.
Changing labels and I.D.s require modifying options from a blue-screen
menu. In these menus all four of the arrow buttons will move the
cursor around the screen. Pressing FLSHBK will cycle through options
where the screen indicates.
Pressing ENTER will leave your current menu, and bring up the
Time/Channel Display. QUIT will leave the current menu, and take
everything off your screen.
SURF
The SURF button on your remote will cycle you through your
four surf menus.
The current Surf list will appear in the Surf display in lower right of
your screen. Surf 1-4 means that your channel changing using the
channel up or down will be limited to the channels that have been
chosen for your Surf list. When the list display reads No Surfing, then
all added channels will be available for you to choose from when
channeling up or down.
MODE
Your remote control can operate up to five different pieces of
equipment. These are called its “modes.” When you are using the
remote to operate your Entertainment Machine, it is in TV mode,
VCR mode when operating your VCR, and so on. There are modes avail-
able to control two “Auxiliary” items. This is for an external stereo sys-
tem, or simply more VCRs, a DVD, Laserdisc, or any other piece of
home theater.
You can change the current mode by pressing either left or right on the
MODE button. An indicator will light to show you the current mode.
VCR/DVD FUNCTIONS
The buttons at the very bottom of your remote correspond to functions
for your Zenith VCR or DVD. The remote has already been programmed
with the code that operates most Zenith VCRs, so you can use those
buttons without have to go through the programming process. For any
other brand, refer to page 43 to see how to program new codes.
vo
lum
e
ch
an
ne
l
mode
mute
flshbk
source
enter
menu
record
pause
1
2
3
4
5
6
7
8
0
9
surf
powe
r
tv
vcr
cable aux 1
aux 2
quit /
pip
rew
stop
ffwd
play
