background image

Page 4 of 32                                                    802006NZ - HT-BCS; BCSH A-AV User Manual - May 2016 - v3.00

Elite Tap:

The Elite tap uses touch 
sensitive controls, to dispense 
Boiling, Chilled and Sparkling 
water.  
When operating the tap, 
ensure the touch surface is dry 
as moisture may interfere with 
the sensor touch control.
The safety lock can be con-
trolled from either the tap or 
from the touch screen display 
in the same way as the Classic 
tap  (See page 3)

Boiling Button

Chilled Button

Safety Lock

3.  

    

Tap functions

All-In-One Tap:

The top of the All-In-One tap is operated the same as a Classic HydroTap. 
The two levers are used for 
dispensing Boiling, Chilled and 
Sparkling water. The safety button 
operating in the same way as on 
the HydroTap.
The Mixer tap lever is operated 
as a classic ‘Flick Mixer’. The hot 
side is marked with a red mark  
and the cold side with a blue 
mark, for dispensing cold to warm 
water. 

Lifting the handle up will decrease 
the flow rate and lowering the 
handle will increase the flow rate. 
Lift the handle all the way up to 
turn the tap off.

When the handle is moved 
towards the blue mark, the temperature is decreased and when moved 
towards the red mark, the temperature is increased. The final temperature 
will be dependant on the temperature of the incoming cold water.

For convenience, the spout may be swivelled, left or right through 120

°.

Содержание 802006NZ

































Отзывы: