10
ZENIC Inc.
URL http://www.zenic.co.jp/ /E-Mail : [email protected]
OPTEX Bldg. 8F 4-7-5, Nionohama Otsu SHIGA, 520-0801, JAPAN
Phone: +81-77-526-2101 / Fax. : +81-77-526-0500
(1) This unit, this material, and the attached software are copyrighted by ZENIC Inc.
(2) The contents described in this material neither guarantees the execution of the industrial
property rights and other rights nor permits its license.
(3) The specifications of this unit may be changed without prior notice for the improvement
of its performance. The contents in this material may also be revised according to the
specification change of this unit.
6. Troubleshooting
Trouble
Possible cause
Remedy
The unit does
not power ON.
The power plug is off the outlet.
Firmly insert the AC adapter to the outlet.
The power connector is
disconnected.
Firmly insert the connector to this unit.
Image does
not appear.
BNC connector is disconnected. Firmly insert the connector to this unit.
There is no input signal.
Check the input device.
Clarifying
does not work.
Setting is at "FV OFF".
Confirm the setting, set to "FV ON".
Much noise is in the input video. Adjust setting items and enter the settings.
Clarifying
does not work
or image is
not seemed to
be clarified.
Input image is a natural image in
daylight.
As for a good natural image in
daylight,even if clarifying is turned on,
drastic changes may not occur and
clarifying just doesn't seem to work(it is
not malfunction).
* Contact our office if a trouble cannot be corrected even after the remedies above are taken
or other additional trouble has been generated.
Bottom
Serial No.
MODEL
S/N
ID
FV-XXXXXX
SXXXXXXXXXXX
XXXXXXXX
