Zenesis Z-101 A, Руководство пользователя

Страница: 7 / 18

1. While the engine is running, hold down Brake Pedal Press and hold
Remote Start Button for 2 seconds. You will see 6 parking light flashes.
You will see alternating BLUE and RED LED flashes on the remote control.
You will hear 6 siren chirps and remote control beeps.
2. Engage the parking brake
3. Turn the key to the OFF position and vacate the vehicle without pressing
the brake pedal.
4. Press and release .
5. You will see 6 parking light flashes. You will see alternating BLUE and
RED LED flashes on the remote control. You will hear 6 siren chirps and
remote control beeps. The system is armed.
6. The engine will run according to the Remote Start Run Time.
7. When you return to the vehicle, press and release . The system is
disarmed.
8. Turn the key to the ON position. Do not turn the key to the Start position.
You may damage your starter motor.
9. Disengage the parking brake and drive away.
3.14 Aux Outputs
•
Aux outputs can be used to control other devices such as window modules
for rolling up or rolling down windows.
•
Press corresponding Button Sequences to activate Aux outputs. 1 parking
light flash and 1 siren chirp will confirm output. The remote control will blink
once and beeps a melody to confirm.
TIMED PULSE, MOMENTARY, LATCH:
Each AUX OUTPUT has three sub-categories of programming: TIMED PULSE,
MOMENTARY and LATCH.
TIMED PULSE, once activated will run the AUX OUTPUT for a programmed set
period of time. For example, if it takes 6 seconds to roll down the windows, the
AUX OUTPUT that is programmed will “run” the AUX OUTPUT for 6 seconds in
order to roll down the windows.
MOMENTARY, once activated will run the AUX OUTPUT according to how long
you are activating (pressing) the corresponding button sequence. For example, if
you have a convertible, you can HOLD DOWN the corresponding AUX OUTPUT
button sequence and stop at a desired time. If you want your convertible roof to
stop at halfway, you can do so through this.
LATCH: once activated will run the AUX OUTPUT. You must press the
corresponding button sequence to deactivate the AUX OUTPUT function.
1.2 Remote Control Button Layout
Door Lock / Arm
Door Unlock /
Disarm
Remote Start
Trunk Release
Antenna
One-way Remote Control
Specifications
Radiation ± 20 ppm / year Temperature - 40°C ~ +80°C
LED
Function