Failed remote start:
•
If
is pressed for 2 seconds while remote start is on, remote start will turn
off. You will see 2 BLUE LED blinks and 2 beeps for confirmation.
•
After the system is disarmed and the door(s) is (are) opened after remote
start, the key must be put into the key cylinder and turned to the ON position
within 2 minutes or the engine will shut off.
•
The default remote start engine running time is 15 minutes. The time can be
changed through the User Programmable Options.
CAUTION:
Do not use the remote start feature if the vehicle is in an enclosed
area. Do not use the remote start feature where laws prohibit its
usage. Do not turn the key to the Start position or else damage may
be done to the starter motor. Ensure that the parking brake
(emergency brake) is always engaged.
2.7 Trunk Release Press and hold
for 2 sec
Trunk release will unlock the door(s) and disarm (302A / 302AS) the system.
NOTE:
On manual transmission vehicles, trunk release will turn off remote start
reservation.
2.8 Valet Mode
Press and hold Function button for 2 seconds and then press and release
Remote Start button
•
Valet mode ON will turn off the alarm feature on 101A and 302AS models.
The siren will not sound.
•
Valet mode ON will turn off the remote start feature on 101S and 101AS
models.
Reason for Failure
Vehicle
Remote Control
Key in key cylinder at ON
position
5 parking light flash & 5
siren chirp
5 RED LED flashes & 5
x beeps
Open door
6 parking light flashes & 6
siren chirps
6 RED LED flashes & 6
beeps
Open hood and/or trunk 7 parking light flashes & 7
siren chirps
7 RED LED flashes & 7
beeps
Failed remote start
reservation
8 parking light flashes & 8
siren chirps
8 RED LED flashes & 8
beeps
Vehicle
2 parking light flashes &
2 siren chirps
Remote Control
2 BLUE LED flashes & 2
beeps
3.2 Remote Control Registration
1. Insert the key into the key cylinder and turn to the ON position (engine is
OFF).
2. Press brake pedal 4 times. On the 4
th
time, hold down the brake pedal.
3. 3 parking light flashes and 3 siren chirps will confirm remote control
programming mode. The LED on the antenna module will also be flashing
quickly.
4. Press and release
on the remote control to register.
5. After each remote control is added, there will be a confirmation of 2 parking
light flashes and hear 2 siren chirps. On the remote, you will see 2 BLUE
LED flashes and hear 2 beeps. You can add up to 3 2-way remote controls
and 2 1-way remote controls per system.
6. Once the key is turned to the OFF position or 10 seconds have passed
without adding a remote control, the system will exit remote control
registration mode. The LED on the antenna module will cease to flash
quickly.
NOTE:
Each time a remote control is added, all remote controls must be re-
registered to the system. Adding a remote control erases previously
stored remote controls from the system.
3.3 Remote Start Reservation
Manual transmission vehicles require remote start reservation in order to ensure
that the vehicle is properly prepared for remote start. There are 2 remote start
reservation modes: automatic and manual. Please note that automatic and
manual do not refer to the transmission type. Rather, automatic and manual refer
to the type of remote start reservation.
A) Automatic Remote Start Reservation (Default)
1) Before turning off the engine, put the transmission into Neutral. Ensure that
the parking brake (emergency brake) is engaged. Take foot off the brake
pedal.
2) Turn the key to the OFF position. The engine should still be running.
3) Exit the vehicle within 2 minutes.
4) Once the last door is closed, the engine will turn off.
5) Lock (arm) the system. Remote start is ready to be used.
B) Manual Remote Start Reservation
1) Before turning off the engine, put the transmission into Neutral. Ensure that
the parking brake (emergency brake) is engaged. Take foot off the brake
pedal.
2) Press
for 2 seconds.
3) Turn the key to the OFF position. The engine should still be running.
4) Exit the vehicle within 2 minutes.
5) Once the last door is closed, the engine will turn off.
6) Lock (arm) the system. Remote start is ready to be used.
Содержание Z-101 A
Страница 1: ...Z 101 A S AS USER MANUAL...
