3.SECONDARY FEATURES
3.1 User Programmable Options
3.2 Remote Control Registration
3.3 Remote Start Reservation
3.4 Temperature Status
3.5 Paging (101 A/AS)
3.6 Remote Control Beep Mute
3.7 Siren Mute (101 A/AS)
3.8 Passive Lock (Arm—101 A/AS)
3.9 Safety Relock (Rearm—101 A/AS)
3.10 Ignition Lock
3.11 Cold Start Timer
3.12 Turbo Timer
3.13 Convenience Run
3.14 Aux Outputs
3.15 Shock Sensor (101 A/AS)
3.16 Shock Sensor Sensitivity (101 A/AS)
3.17 Shock Sensor ON/OFF (101 A/AS)
3.18 Z-PASS TOUCH
3.1 User Programmable Options
1.
Press and release
3 times.
2.
Press and release
.
3.
You will see 1 parking light and 1 remote control BLUE LED flash. You will
also hear 1 siren chirp and 1 remote control beep. You are now in User
Programming Mode. The remote control BLUE LED will flash quickly to
signify that you are in programming mode. Follow the chart below for
programming options.
4.
Press and release each button in the Button Sequence to enter the
programming mode for the desired feature.
5.
You will also hear 1 remote control beep to signify the first button in the
sequence.
6.
You will hear 2 remote control beeps to signify the second button in the
sequence.
7.
Press the appropriate button according to the option for the feature.
8.
You will hear 3 remote control beeps to signify the third button press.
9.
If programming for the feature is successful, you will see parking light flash
(es) and remote control BLUE LED flash(es) according to the last button
being pressed. You will also hear corresponding siren chirp(s) and remote
control beeps. Refer to table below.
10.
You can program more features if desired.
11.
If you are finished programming, wait until you exit programming mode.
The remote control BLUE LED will stop flashing quickly.
Button
Parking Light & LED
Flash(es) / Chirp(s) /
Beep(s)
1
2
3
4
5
Содержание Z-101 A
Страница 1: ...Z 101 A S AS USER MANUAL...
