Zener 8000-V, Руководство по установке

Страница: 41 / 70

ZENER 8000-V Installation Manual
IM00165 35
Control Inputs
The ZENER 8000-V is operated by a set of digital input functions designed to work with logical signals that
originate external to the drive. The extensiveness of this set of functions is testament to variety of applications
the ZENER 8000-V can operate with. The list of functions includes:

I00 FWD&LATCH, I01 REV&LATCH, I02 ~STOP

I03 FWD, I04 REV

I05 UP, I06 DOWN

I07 RESET

I08 ESO

I09 JOGFWD, I10 JOGREV

I11 REMOTE
Not all functions are necessary for a given application and unused functions may be turned “off”. Functions that
are necessary have assigned to them a physical input from the terminal strip. Review “Terminal Configurations”
in the “Major Features” section of this document.
The menus within the “Digital Input Configurations” menu provide a way to map a finite set of physical digital
inputs to the internal set of input functions. The simplest way to configure digital inputs is to utilise one of the
pre-existing configurations from the
G01 DI config menu. Otherwise a custom configuration can be organised
where each function has a physical input terminal assigned to it. In most cases the inputs levels and edges are
available for selection. For example digital input
D1 is found at terminal 2 and is identified as D1(2) . The choices
are:
Selection Input Truth
D1(2) Active high level is selected
~D1(2) Active low level is selected
/D1(2) Active rising edge is selected
D1(2)\ Active falling edge is selected
Selecting Standard Input Configuration
Available Choices: Standard Industrial
HVAC
Power up/start
Forward/Reverse
Machine drive 1
Machine drive 2
Machine drive 3
Custom

Press

once to begin configuration selection.

Use the
▲
/
▼
buttons to view the choices.

Press

to confirm the choice. ESC to abandon the change.
G01 DI config
>Standard
Industrial