ZENEC ZEM-W703MRM, Инструкция по эксплуатации

Страница: 20 / 32

20
USING THE REMOTE CONTROL
■
Aim the remote control directly at the unit.
■
Maximum IR distance is 3 meters from the IR – sensor.
■
Direct sunlight or very bright light reduces sensitivity to the IR – remote.
■
Obstruction between the IR – sensor and remote control may disrupt IR – signal
reception.
BATTERY
■
Please remove the insulation plastic sheet insert from
the battery holder before use.
■
If the remote control does not function correctly or the
operating range is reduced, replace the battery with a
new battery (CR2025).
1. Press the hole on the back of remote control with
a small tool. At the same time, pull out the battery
holder.
2. Insert the new battery, with the (+) side up.
3. Push to close the battery holder. You will hear a click
as the holder locks.
NOTE
●
Remove batteries if they are empty or if the remote control will not be used for a long
time.
●
Battery and small parts can be a choking hazard. Keep the remote control away from
young children.
ZEM-W703MRM Manual D+E.indd 20 11.07.2005 10:32:37 Uhr