ZENEC ZEM-1040RM, Инструкция по эксплуатации

Страница: 3 / 12

3
SAFETY RECOMMENDATIONS
-
Operating temperature:
Never expose the monitor to extreme heat or direct sunlight.
Please note, that TFT monitors should not be operated in very cold environments (below
0°C). During winter time, wait until the passenger compartment of your vehicle has heated
up enough, to allow for a proper function of your LCD monitor.
-
Exposure to liquids:
Do not expose the monitor to water, or spilled fluids like organic solvents etc., that could
enter the device. A short circuit may occur, leading to potential fire hazards.
-
Solid mounting:
In your own interest, only mount this monitor to solid surfaces, using the supplied moun-
ting hardware. The g-forces that can occur during an accident are capable of accelerating
loose devices up to very high impact velocities. This can be life-threatening.
-
Cleaning:
To clean this monitor, use a glass cleaning agent with a soft towel or tissue. Do not use
any organic detergents or solvents, as organic fluids may damage the surface of the
housing.
-
Driver’s safety regulations:
According to the law in different European countries, driving with monitors in use is NOT
allowed. Please respect the traffic regulations of your country, or you might face penalties
in case of an accident.
-
Service & Warranty:
The manufacturer’s warranty for this device is 2 years, from the date of purchase at retail.
If you experience problems of technical defects with this device, bring it back to the retai-
ler where it was purchased.
Please note: The warranty is void when you attempt to repair or open this device yourself!
ZEM-W1040RM Manual 12.09.2003 9:05 Uhr Seite 3