ZENEC ZEM-1040RM, Инструкция по эксплуатации

Страница: 4 / 12

4
DVD-Headunit
10.4” FLIP DOWN TFT MONITOR
6-pin
connector
To +/-12V
power supply (or car ignition)
black
red
In-line fuse
AV-
Interface
video
(yellow) audio
(red)
Switched lead
dome-lights
+12V
GND
CONNECTION SCHEMATIC
CONNECTIONS / INPUTS & OUTPUTS
At the unit itself, there are three wires to be connected, to use the dome light function:
e
red wire: +12V
e black wire: GND
e White wire: To be connected to the switched lead of the vehicles internal lighting
A/V Interface (Black Box): The ZENEC ZEM-1040RM comes with an A/V interface
blackbox, that features the following in- and ouputs:
e Extension lead with 6-pin pc-plug for connection of the TFT monitor
e A red* and a black power supply wire to be connected to the on board voltage of the
vehicle. The red wire with inline fuse holder should be connected to the ignition of the
vehicle, to avoid unnecessary current drain when the vehicle is not in use.
e
A gold plated RCA input at the blackbox, to connect the video source (DVD headunit,
TV tuner etc.).
e
Two separate RCA output plugs (red and yellow), to connect a game console or other
devices.
* the read power wire features an inline fuse holder – the correct fuse rating is 250V/2A –
only use the correct fuse rating or the monitor and the video electronics could be dama-
ged!
ZEM-W1040RM Manual 12.09.2003 9:05 Uhr Seite 4