ZENEC ZE-MC2000, Инструкция по эксплуатации

Страница: 62 / 104

62
RADIO MODE
sElECT Radio as PlaYiNg souRCE
Open the ‚SOURCE MENU‘ and then select ‚RADIO‘.
sElECT oNE Radio BaNd
Method 1:
■
Press the [FM/AM] key repeatedly on the front panel or the
[BAND] key on the remote control.
Method 2:
■
Touch the [BAND] icon on the user interface. The radio band will
change among FM1, FM2, FM3, AM1 and AM2.
sEaRChiNg FoR a sTaTioN auToMaTiCallY
searching along increasing frequencies
■
Press the [Right] key on the front panel or on the remote
control.
sEaRChiNg aloNg dECREasiNg FREquENCiEs
■
Press the [Left] key on the front panel or on the remote control.

NoTE:
■
To stop searching, repeat the operation above or press other
keys having radio functions.
■
When a station is received, searching stops and the station is
played.
If the unit receives a stereo broadcasting, the indicator light of
stereo ‚ST‘ on the TFT will be lighted.
sEaRChiNg FoR a sTaTioN MaNuallY
During manual search, the frequency will be changed in steps.
Method 1:
■
Press the [RIGHT/NExT] or [LEFT/PREVIOUS] key on the front
panel or press the [Up] or [Down] key repeatedly on the remote
control.
Method 2: Using the touch screen
■
Touch the [KEYPAD] icon and then touch the numeric buttons
to input the radio station frequency numbers.
PREsETTiNg sTaTioNs auToMaTiCallY
Only stations with sufficient signal strength will be detected and
stored in the memory.
Method 1:
■
Press the [ENTER] key on the front panel or on the remote
control.
Method 2:
■
Touch the [AS] icon on the user interface.