5
5. Unscrew and remove the four Phillips (PH2) or
hex (10mm) screws from the original unit.
6. Carefully pull the original unit out of the radio bay.
Then unplug all cables on the rear of the unit.
7. Transfer the original radio brackets (left and
right) to your ZENEC system.
8. (No picture)
Install the GPS antenna (No. 9) in a suitable
position, making sure that the GPS reception is
not adversely affected by unwanted shielding of
metallic vehicle parts (thermal insulation glazing,
etc.). Then route the connection cable into the
radio bay.
9. (No picture)
If you have purchased the optional external Blue-
tooth microphone (N-ZENC-MIC), install it now
and then insert the connection cable into the radio
bay. Depending on your preference, and whether
you select an internal or external microphone, the
microphone source for Bluetooth mode must be
set accordingly in the unit menu.
10. (No picture)
Route the USB extension cable (No. 7) from the
radio bay to your preferred position.
Installation:
7
5
6
Содержание Z-E6150
Страница 1: ...1 Z E6150 INSTALLATION MANUAL EN ...