Z-E3215-MKII
46
47
MAIN DEVICE SYSTEM SETUP: IMPORT/EXPORT SYSTEM SETTINGS
Go to Setup>Misc>Help
NOTE:
■
Make sure the USB flash drive has been FAT32 formatted.
■
Refrain from manually modifying the generated export file. Re-import
relies on proper file integrity.
■
After adding new functions, by means of a system update, they will
always be intialised with standard default values. This compensates for
lacking values from the import file content.
■
After a firmware update, check the update installation instructions for
notes on system settings import and take them into consideration.
1. Connect USB flash drive to device.
2. Tap "OK", at System Settings-Import
option, to launch import.
3. Restart device once import is
completed.
Export system settings:
1. Format USB flash drive with FAT32.
2. Connect USB flash drive to device.
3. Tap "OK", at System Settings-Export
option, to launch file export.
Import system settings:
MAIN DEVICE SYSTEM SETUP: VIDEO
Animated picture visualises your setting
during adjusting TFT screen brightness.
It´s possible to adjust the brightness of
the Day-/Night TFT screen brightness
separately.
Standby activation turns screen off.
Apart from that, the device operates in
a normal manner.
Tap on the screen to exit standby.
Day-/Night TFT screen brightness is
controlled by built-in GPS time signal or
CAN signal of the car.
