ZENEC PRIME, Руководство пользователя устройства

Страница: 36 / 49

70 71
Device Manager
The pairing process requires the BT function on the end device to be enabled. Please also take note
of the instructions of the device manufacturer on the pairing of devices.
Function Icon Operation
Device
Manager
Touch to access this view
Function Icon Operation
Search
Touch to search for a new Bluetooth device
(not possible if two devices are connected)
Pair Touch to reconnect a paired Bluetooth device
Disconnect Touch to disconnect a paired Bluetooth device
Delete
Touch to delete a Bluetooth device from the list
(requires the device to be disconnected)
Fig. 5/06
Icon Meaning
This icon indicates that the paired Bluetooth device supports HSP/HFP, and can
be used via the hands-free system.
Hands-free System S. 49
This icon indicates that the paired Bluetooth device supports A2DP, and can be
used via the audio player.
Settings → BT Configuration → BT Settings S. 73
Pairing
Via the ZENEC system
Function Icon Operation
Search
Touch the magnifying glass to initiate a search for BT devices.
From the list select the desired mobile device that you want to
synchronize with the ZENEC system.
After selecting follow the instruction of the ZENEC system.
Code Standard Code*: 1 2 3 4
Fig. 5/07
Via the mobile device
Function Icon Operation
Search
Make sure that the ZENEC system is in Device Manager view
otherwise the ZENEC system will not be visible to others. Follow
the instructions of the device manufacturer on pairing.
Auto Connect
Once a mobile device has been connected with the ZENEC system, it will be automatically paired
when the ZENEC system is started. On being briefly disconnected the ZENEC system will attempt to
establish a new connection.
NOTE
On pairing for the first time, be sure to permanently enable the connection confirmation on your
mobile device, otherwise malfunctions may occur during the Auto Connect process.
NOTE
*For mobile devices that do not support the SSP standard.