TABLE 1 – ZENAIR INSPECTION FORM
Make / Model
ZENAIR CH2000
Serial No.
Airframe Hours
Type of Inspection
(Circle One)
Registration No:
Engine Hours
50 100 500 1000
Symbols: + Indicates perform task, - Indicates do not perform task
Task
Refer to
Intervals
(Flight Hours)
Initials
50
100
500
1000
CABIN GROUP
1. Inspect the control wheels, linkages,
column and torque tube assemblies for
cracks, distortion, etc.
2. Check controls for ease of operation
and correct travel.
3. Check operation cockpit lights and
external lights.
4. Check operation of all circuit breakers
and switches. See Service Letter of
10/15/2003
5. Check flight control cables for routing,
fraying, corrosion and tension.
5a Inspect flight control turnbuckles,
pulleys and guides for wear, damage
and safeties.
6. Check stabilator trim tab indicator for
correct operation.
7. Inspect the flap motor, actuator,
extension tube, actuator lever,
interconnect tubes, control levers and
control rods for cracks, distortion,
security, etc.
7a Inspect flap indicator cable and
indicator for security and correct
operation.
8. Perform functional check of the flap
system.
9. Inspect all windows for cracks,
cleanliness, etc.
10. Check cabin finish for damage,
deterioration, etc.
11. Perform operational check of the fuel
selector valve and safety lock.
12. Inspect door fit and latching
mechanisms. Also see Service Letter
of February 28, 2005
13. Check upholstery for condition
Section VII
Section VII
Section X
Section X
Section VII
Section VII
Section VII
Section VII
Section VII
Section VII
Section VIII
Section XII.
-
+
+
+
-
-
+
-
-
+
+
-
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
Nov-02
3.5
