Pitch the first Aerobase in the desired position.
1
2
3
Zip on the Aerobase Connector to the side you wish to connect the second shelter.
The logo should be facing the outside.
Set up the second Aerobase, but DO NOT peg in position.
Zip on the remaining connector zip to the second Aerobase.
Attach the small steel hook through the zipper heads to prevent them separating
Align the two Aerobase Shelters so that they sit parallel to each other. There
should be a gap of 60cm between each shelter. It is important that this spacing is
correct, as this will affect the positioning of the wall.
Peg out the wall closest to the first Aerobase.
Pull Second Aerobase away from first Aeobase and ensure it sits square.
Peg all remaining peg points
4
5
6
7
8
9
