![background image](http://html1.mh-extra.com/html/zelmer/zmm4045b/zmm4045b_user-manual_928310020.webp)
20
PL
EN
Fix the assembled appliance on the stable table surface, cut the fruit into strip of approximately
20mm×20mm×20mm and put into material plate.
After starting the power switch, put fruits into feed port in turn after confirming the normal operation of
the appliance and slowly press fruits by feeder push.
Please disconnect the power line after juicing.
Note:
in case food locked to the screw out of work during operation, immediately turn off the power.
Making mashed potato and garlic
Important notice: the installation method for making mashed potato and garlic is same as that of juicer,
except replacing juicer mesh tube in step 2 with mashing cylinder and replacing juicer nozzle with
mashing nozzle in step 4.
Operational approach:
Fixed the assembled appliance on the stable surface, cut the potato (peeled garlic) into strip of
approximately 20mm×20mm×20mm and put them into material plate.
Turn on the power switch and slowly press the food into feed port by feeder push after confirming normal
operation of the appliance.
Disconnect the power supply after use and take processed food away.
Important notice: the installation method of making noodles is same as that of juicer, except replacing
juicer mesh tube in step 2 with mashing cylinder and replacing juicer nozzle with round-noodle/ linguine
nozzle in step 4.
Operational approach:
Fix the assembled appliance on the stable surface and put the duff into material plate.
Turn on the power switch and slowly put the duff into feed port after confirming the normal operational of
the appliance.
Disconnect the power supply after use.
Shred and Slice
Installation method:
Step 1: hold and tilt the tee-junction of shred and slice toward the switching push button at about 45
degrees embedded in the output gear, anticlockwise screw in the body for fastening and the lock button
will automatically fix the tee-junction. (Fig.18)
Step 2: upward open the tee-junction of shred and slice and put the cutter in (select cutter of thick
filament, thin filament and slice as needed). (Fig.19)
Step 3: tighten the tee-junction cover of shred and slice, and fix the assembled appliance on the stable
surface. (Fig.20)
Operational approach:
Put the prepared fruits or vegetables in the material plate.
Turn on the power switch, put the food into feed port in turns after confirming the normal operation of the
appliance and press the food by feeder push.
Scope of application: pumpkin, cucumber, sponge gourd, potato, sweet potato, carrot and other fruits or
vegetables with fine fibers.
Note:
in case food locked on the screw out of work during the operation, immediately turn off the power
supply.
Juice extractor
Installation method:
Step 1: hold and tilt the tee-junction of minced meat toward the switching push button at about 45
degrees embedded in the output gear, anticlockwise screw in the body (as shown in the picture) for
fastening, and the lock button will automatically fix the tee-junction.
Step 2: put the screw of minced meat into the tee-junction (as shown in the picture)
Содержание ZMM4045B
