Zelmer ZMM4045B, Руководство пользователя, Страница: 19 / 84

19
PL EN
Operational Approach:
Cut the meat into long strip of about 20mm×20mm×60mm (meat without bone or tendons is
recommended) and put it into the material plate.
Turn on the power switch, and put the prepared meat into feed port of tee-junction in turn after
confirming the normal operation of the appliance.
In case the food failed to be automatically drawn into the meat screw, slowly press the food with feeder
push. (Feeder push is allowed only).
Please disconnect the power plug after use.
Note: in case food locked in the screw out of work during the operation, immediately turn off the power.
Making Sausages
Installation method:
Step 1: hold and tilt the tee-junction of minced meat toward the switching push button at about 45
degrees embedded in the output gear, anticlockwise screw in the body (as shown in the picture) for
fastening, and the lock button will automatically fix the tee-junction. (Fig.7)
Step 2: put the screw of minced meat into the tee-junction (as shown in the picture). (Fig.8)
Step 3: assemble sausage filter (as shown in the picture). (Fig.9)
Step 4: put the sausage tube into the tee-junction (as shown in the picture). (Fig.10)
Step 5: screw up the aluminum alloy cap (as shown in the picture). (Fig.11)
Step 6: put and fix the material plate into tee-junction. (Fig.12)
Operational approach:
Fix the assembled appliance on the stable surface, turn on the power switch, embed the clean-washed
casing into the discharge port (for fastening) after confirming the normal operation of the appliance, put
the marinated food into the material plate, and push it into feed port by feeder push.
Please disconnect the power plug after use.
Scope of application: a variety of meat without bone or tendon, meat and seasoning mixture.
Slow Juicer
Juicing
Installation method
Step 1: hold and tilt the juicing tee-junction toward the switching push button at about 45 degrees
embedded in the output gear with one hand, anticlockwise screw in the body for fastening, and the lock
button will automatically fix the tee-junction. (Fig.13)
Step 2: put the juicing screw into the tee-junction and embed the juicer mesh tube into the tee-junction.
(Fig.14)
Step 3: aim the neck of juicer tee-junction cover at the neck of juicer tee-junction, and anticlockwise
screw it into the tee-junction. (Fig.15)
Step 4: aim the slot of juicer nozzle at the neck of juicer tee-junction cover and anticlockwise screw it to
be fastened with the cover. (Fig.16)
Note: use small-caliber nozzle for apples, pears, watermelons, cucumbers, carrots and other fruits with
fine fiber.
Use large-caliber nozzle for celery, sugarcane and other food with crude fiber.
Under the same condition, the juice yield will be relatively higher when screwing the juicer nozzle in sign
“1” of tee-junction cover, while the juice yield will be relatively lower for sign “2”.
Step 5: respectively put the residue and juice collector cups into outlet under the juicer and nozzle outlet.
Put the material plate in the inlet of juicer tee-junction for fastening. (Fig.17)
(Select different juicer nozzle for different food)
Operational approach: