Zelmer ZIS8402 PRO-Compact, Руководство пользователя

Страница: 15 / 84

15
PL EN
Troubleshooting
Problem Possible cause Solution
The iron begins to smoke
when switched on.
During first use: certain
components on the appliance
have been lightly greased at the
factory and may produce a small
amount of smoke when initially
heated.
This is completely normal and
will stop after a short while.
The iron does not produce any
steam.
During first use, water has no
filled the hose (4) completel .
Press and hold the steam
release button (12) until steam
comes out.
The “Calc’nClean” indicator
light (1) will flash. The
descaling process has not been
completed.
Perform a cleaning cycle
(see the “Descaling process”
section).
Dirt comes out through the
soleplate.
There is a build-up of lime scale
or minerals in the iron.
Carry out a cleaning cycle
(see the “Descaling process”
section).
Chemical products or additives
have been used.
Never add products to the
water (see the “Filling the
water tank” section). Clean the
soleplate with a damp cloth.
The “Calc’nClean” indicator
light (1) does not turn off.
The iron descaling process
has been stopped before being
completed.
Restart and complete the iron
descaling process.
The appliance makes a
pumping sound.
Water is being pumped into the
iron.
This is normal.
The water tank is empty. Fill the water tank.
There is too much steam
coming out of the iron.
Mode BOOST is turned on.
Activate the normal mode by
pressing the “ECO/BOOST”
(3) button.
The iron produces little steam.
The iron has been switched on
recently.
It is normal, the iron produces
steam gradually until it is
stabilized.
If the above tips do not solve the problem, get in touch with our customer service.