62
VC1400-001_v02
Before first use
B
1
Put the end of the suction hose to the inlet of the vacuum
cleaner. Pay attention to insert the protrusions situated on
the end of the hose into the special incisions in the inlet of
the vacuum cleaner.
2
With a clockwise movement turn the end of the suction
hose tight.
3
Attach the other end of the hose (the handle) to the
suction tube. In order to do this, press the lock
A
in the
telescopic suction tube and put the tube in the handle, so the
lock
A
is fastened in hole
B
.
4
Select the needed length of the telescopic suction pipe
by sliding the slider according to the arrow, and pulling the
pipe out/in.
5
Install a nozzle or a brush on the other end of the suction
pipe.
6
You may install a basket for collecting small objects in
the nozzle brush with a small object separator. In order to do
this, remove the hole plug, and insert the basket.
7
For hard surfaces (wooden floors, plastic floors, ceramic
tiling, etc.) pull out the brush by pressing the switch on the
nozzle brush as it is shown in the picture
.
8
Grab the plug of the cord
(3)
, and pull it out of the vacuum
cleaner.
When pulling out the cord pay attention to the
yellow band which marks the end of the cord. Any
attempts to unwind the cord further (especially
forcefully pulling on it) may lead to damaging it.
9
Put the plug of the cord in an electric socket.
Before turning the vacuum cleaner on, make sure the
CYKLON dust container is installed in the chamber of the
vacuum cleaner, and also the basic filter and the outlet filter
are installed in the vacuum cleaner.
10
Press the on/off button to start the vacuum cleaner.
11
The vacuum cleaner is equipped with an electronic
controller of suction power, which enables smooth regulation
of suction power of the vacuum cleaner. Turn the dial up or
down to respectively increase or decrease suction power.
Design
A
1
Outlet filter cover
2
Fastening for the nozzle brush
3
Plug with the power cord
4
Locker for the crevice nozzle
5
Fastening of the upper cover
6
ON/OFF button
7
Suction power regulation dial
8
Cord winder button
9
Handle
10
Bolt – a mechanic controller of suction power
11
Suction hose
12
Telescopic suction pipe
13
Outlet microfilter (installed in the vacuum cleaner)
14
HEPA H12 basic filter (installed in the CYKLON dust
container)
15
HEPA H12 basic filter protective casing (installed in the
CYKLON dust container)
16
CYKLON dust container (a removable part of the vacuum
cleaner)
17
CYKLON dust container cover
18
Nozzle brush with a small object separator
19
Crevice nozzle
20
Small brush
21
Small nozzle
22
BNB (Brush Natural Bristle) floor brush (an additional
accessory – available in retail outlets with vacuum
cleaners)
23
Turbobrush (an additional accessory – available in retail
outlets with vacuum cleaners)
TYPES OF VC1400 VACUUM CLEANERS
Design and
accessory
options
Type
Max power
Suction power control
Suction pipe
Nozzle brush
Small nozzle
Crevice nozzle
Small brush
1
2
3
7
8
9
10
11
VC1400.0SF
1700 W
+
Telescopic
+
+
+
+
VC1400.0SK
1900 W
+
Telescopic
+
+
+
+
Содержание Tiny VC1400
