Zelmer AH1500, Руководство пользователя

Страница: 51 / 54

55
AH1500-001_v01
Maintenance and operation
PREPARING THE APPLIANCE FOR
OPERATION
Place the appliance on a dry, flat surface away
from potential heat sources (heating plates/
panels, cookers, ovens, etc.).
1 Remove the steam jet from the water tank.
2 Remove the water tank from the base of the humidifier,
lifting it up with the handle. Turn the water tank upside down.
3 Loosen the nut on the valve by turning it counter
clockwise.
The direction of unscrewing and screwing is
marked on the underside of the cap of the valve.
4
Install the water softener filter on the cap with valve (see
“FITTING THE FILTER WATER SOFTENER”).Fill the water
tank with clean water. The maximum water tank capacity is
about 3.6 liters.
Use cooled boiled water or distilled water. The
water temperature should not exceed 40°C.
5
Replace the cap from the valve on the water tank and
turn it in a clockwise direction until the water tank will be
sealed.
The direction of unscrewing and screwing is
marked on the underside of the cap of the valve.
6
Turn the container upside down and mount the water
tank by putting it on the base of the humidifier. Water begins
to overflow to the base of the humidifier. Mount the steam jet
on the water tank.
CONTROL PANEL
The air humidifier is equipped with a control panel with LCD
display and buttons designed to start the appliance and
its operation. Each button has the operation indicator. The
illuminated light indicates that the appliance is running, and
shows its operation mode.
Each button is accompanied by a beep.
On/off button “ON/OFF” is designed to start the appliance.
When pressed, you hear the “tune” and air humidifier will run
in automatic mode. Operation indicators on the buttons “ON/
OFF”, “AUTO” and “MODES” will flash and the display shows
the level of humidity in the room.
AUTOMATIC MODE - the appliance is equipped with
a humidity sensor, which measures the level of humidity
in the room. The air humidifier according to the displayed
value, adjusts the amount of generated steam. If the level of
humidity in the room is:
Below 60% RH - humidifier produces a greater amount
–
of steam,
B
A
Suggestion
Information on the product and suggestions
for its use
The appliance is intended solely for domestic use.
●
It is not intended for commercial use, economic, or for
outdoors use.
Before first use, keep a humidifier in the room at room
●
temperature for about 30 minutes.
Technical parameters
The technical parameters are indicated on the rating label.
The appliance features double electrical insulation (Class II)
and does not require grounding.
The air humidifier fulfills the requirements of the existing
norms.
The appliance is in conformity with the requirements of the
directives:
Low voltage appliance (LVD) – 2006/95/EC.
–
Electromagnetic compatibility (EMC) – 2004/108/EC.
–
The appliance was marked by the CE sign on the rating
label.
Structure of the appliance
A
1 Steam jet
2 Water tank
3 Cap with valve
4 Base of humidifier
5 Float switch
6 Ultrasonic transducer
7 Connection cable
8 Fan outlet
9 Control panel
10 Stem for opening the valve
11 Holder
12
Filter water softener
13 Brush
14 Cover of the inlet filter
15 Inlet filter
CONTROL PANEL
A LCD Display
B On/off button “ON/OFF”
C The “MODES” button – mode selection
D The “ION” button – ionization switching on / off
E The “AUTO” button – automatic mode switching on
F Air humidity level indicator
G Sleep function operation indicator