
64
Coal filter (available at sales network)
1. Operation
Coal filters are used only when the cooker hood is not connected to the ventilation duct.
Active-coal filters can absorb odors until they are saturated. Active-coal filters can
-
not be washed or regenerated; they should be replaced at least every two months or
more often if the cooker hood is intensively used.
2. Replacement
a) Remove the aluminum anti-grease filter.
b) Remove the coal filter located inside the cooker hood, on the motor housing (on both
sides of the motor) by twisting it off.
c) Proceeding in the reverse order than indicated in point b, install the new filter on
the motor turbine housing and turn it to protect against falling out.
Lighting
The lighting installation is composed of two 20 W halo
-
gen lamps.
In order to replace the light bulb:
a) Unplug the cooker hood.
b) Prize up the ring around the halogen lamp with a flat
tool or screwdriver and carefully remove it.
c) Replace the light bulb using a cloth or paper.
d) Reinstall the ring together with the glass proceeding
in the reverse order.
NOTE: Make sure not to touch the installed halogen
lamp light bulb directly with fingers!