![background image](http://html2.mh-extra.com/html/zelmer/496/496_user-manual_3355466044.webp)
46
496-006_v01
Dear Customer!
Congratulations on your choice of our appliance, and
welcome among the users of Zelmer products.
In order to achieve best possible results we recommend
using exclusively original Zelmer accessories. They have
been specially designed for this product.
Please read this instruction manual carefully. Pay special
attention to important safety instructions. Keep this instruction
manual for future reference.
Appliance characteristic
Juice extractor type 496 is an electrical appliance for fast
fruit and vegetable juice centrifuging including automatic
pulp separation.
The raw material is pulped and then the juice is centrifuged
from the pulp. The usage advantages are increased due to
the easy and simple operation. Electronic speed stabilizer
provides constant rotation speed independent on loading,
which allows juice even consistency obtaining. The juice
extractor is equipped with 2 centrifuging speeds (for soft and
hard fruit), which have been selected to obtain the optimal
quality parameters for squeezed juice. Keeping the maximal
content of vitamins, pectin, enzymes and minerals causes
the lower juice clarity. This is an intended effect, as the juice
extractor Manufacturer decided, that keeping the highest
nutrient, pro-health and dietetic values of a juice is more
important than its clarity. The juice extractor is equipped
with special safety system preventing starting it in case
of incomplete appliance assembling. The juice extractor
is additionally equipped with filter self-cleaning function.
After pressing
TURBO
button the engine operates 1,5÷2
seconds with high rotation. High rotation helps to clean the
filter in case the vibration occurring due to excessive pulp
accumulation.
TURBO
function can be used in 10 seconds
intervals only. The juice extractor can operate 15 minutes
without any break. The quantity of juice obtained from i.e.
1kg of a raw material, depends on its freshness, as well as
on filter cleanness and pulping blade condition.
The parts in contact with processed raw materials are made
of materials permitted for contact with food.
EN
Safety operation instructions
Read this manual carefully before you use the
appliance.
Make sure that you understand the below safety
precautions.
Danger! / Warning!
Risk of injury
Do not start up the appliance when the supplying cord
●
is damaged or the casing is visibly damaged.
If the non-detachable part of the cord is damaged,
●
it should be replaced by the producer or at a proper
service point or by a qualified person in order to avoid
any hazards.
The appliance can only be repaired by qualified service
●
personnel. Improper servicing may cause a serious
hazard to the user. In case of defects please contact
a qualified service center.
Do not use the juice extractor when the filter is damaged.
●
Before you start the juice extractor up, check the lid if it
●
is locked well with the locking bar.
Do not unfasten the locking bar during juice extractor
●
operation and the filter wiring, as in such case the
safety system will switch the appliance off.
Turn off the device and unplug it from an outlet before
●
replacing the equipment or approaching moving parts
during use.
Unplug always before cleaning, assembling or
●
disassembling.
To push the product use the pusher only.
●
Be especially careful with the juice extractor operation
●
in the presence of children.
Do not place the juice extractor on the wet surface.
●
Do not use the juice extractor without the pulp collector.
●
This appliance is not intended for use by persons
●
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by
a person responsible for their safety.
Children should be supervised to ensure that they do
●
not play with the appliance.
Warning!
Risk of property damage
Do not disconnect the plug from the socket pulling the
●
cord.
The appliance may only be plugged to an electrical
●
socket (alternating current only) with a voltage in
conformity with the one given on the rating plate of the
appliance.
Содержание 496
