Zelmer 481.4, Руководство пользователя

Страница: 58 / 60

64
481-018_v01
The mini food processor blades are very
sharp. Be very careful during assembling,
disassembling or during cleaning. Store the
knife inside the cover for safety reasons.
Do not mill too hard products, such as: coffee
grains, nutmeg, ice cubes etc.
Before chopping a bigger pieces of product,
cut it into smaller pieces – approximately 1 cm.
The chopping process can not last longer than
45 s. Wait until the motor cools down before
you start up the blender again.
In case the products stick to the blades or the internal walls
of the container:
switch off the appliance,
–
remove the motor with the cover,
–
remove the products out of the blade and walls,
–
re-assemble the appliance – as defined above and
–
continue the operation.
Approximate time for processing of selected
products for the recommended gear
Product
Recommended
gear
Processing
time
5 20-30 s
5 25-30 s
1/4
3-5 15 s
5 40 s
(
×30
)
5 10 s
5 15 s
5 30 s
5 20 s
The processing time can be shortened depending how thick
the final product particles should be.
OPERATION WITH ICE CRUSHER
The appliance characteristics
Zelmer food processor is equipped with the ice crusher which
is used for crushing ice and e.g. frozen fruit.
You can use the crusher only with the container
and lid of mini food processor!
Application of the accessories
Double­sided disc – is used for crushing, grinding ice and
frozen products. The disc is round, the blades are double-
sided. One side, which we recognize by the applied plastic
fifteen-pointed star, fig.
35 A
is used for first level grinding
„I” (smaller particles of grinded product), the other side is
used for second level grinding „II” (bigger particles of grinded
product) and it is marked with sevenŁpointed star fig
35 B
.
Spindle
38
– is used for fixing the disc.
Preparation of the ice crusher
Before assembling and disassembling the food
processor motor drive of the ice crusher, make
sure that the supply cord plug is disconnected
from the mains supply outlet.
Wash the parts in contact with processed product before
first usage.
Operate the mixer so, that the closed/open markings
located on the appliance are well visible.
Operation with ice crusher
1
Place the base
40
on firm, flat and dry surface.
2 Insert the mini food processor container
39
in the
base
40
.
3
Place the disc for ice
35
on the spindle
38
(double -
sided disc), so that the blades provided for operation are on
the top.
4 Place the disc with the spindle inside the mini food
processor container
39
so that the pivot protruding from the
container is inserted into the spindle orifice.
5 Insert the ice crusher container
33
on the fasteners
of the mini food processor container, and then lock the ice
crusher container, turning it until you can feel it is blocked.
6 Place the processed products inside the container
33
not exceeding MAX level.
When you fill up the crusher container
33
with
appropriate amount of processed product (do not
exceed MAX level) center the spindle
38
(put in the
middle) to enable its proper coupling with the mini food
processor lid
32
.
7 Screw the lid of mini food processor
32
to food processor
drive (in clockwise direction), until you feel it is blocked.
Further excessive turning the lid of mini food
processor can lead to damage.
8 Place the mini food processor lid
32
on the container
33
K
300 g
(500 ml)
200 g
(500 ml)
250 g
(500 ml)
250-300 g
(400-500 ml)
1 cm
1 cm
200 g
(500 ml)
20 g
(500 ml)
1 piece
(2 cm)
300 g
1/8