Strona
16
z
21
VACUUM CLEANER DISASSEMBLY
Before attempting disassembly, carefully read this service manual and the
product's operation manual.
Disassembly of 1600 vacuums
Fig. 1 Position of catches fixing
the container catch
Fig.2 Position of catches fixing
the rewinder insert
Disassembly should be performed on a table covered with clean felt or other soft
material, taking care not to scratch the plastic parts. Set the vacuum cleaner on the table:
Release the container catch
9
and open the container
1
, remove the bag from the
container.
Use a thin rod to knock the two container axles
24
out of the container and remove the
container
1
from the body
2.
Remove screws
102
and
103
and remove the gasket frame
10
from the container, along
with the container gasket
20
. Remove the container gasket
20
from the gasket frame
10
.
Insert a thin screwdriver into the gap between the container
1
and the interlock
11
(fig. 1)
and bend out two visible catches
z1
, simultaneously pulling the container catch
9
towards
you.
Remove the container catch
9
with interlock
11
and spring
23
from the container.
Remove the interlock and the spring from the catch.
Remove screw
105
,
then release the two spring catches and slide the container casket
out
15
.
Remove the cover
16
from the container casket by releasing the two spring catches.
After removing the cover, slide two springs
40
out of their sockets.
Unscrew two screws
106
from the container and pull out the front strip
14
.
Remove screw
104
, remove the washer
101
and the front wheel support
29
from the
container's
1
sleeve.
Bend out the support's catches
29
to remove the front wheel
30
. Proceed similarly with
the second wheel.
Open the accessories cover
8
and pull it back while lifting its axle over the ribs of the
body and releasing its catches. Remove the accessories.
Simultaneously push both catches on the filter cover
7
to open it and remove it from the
body
2
. Remove the outlet filter
37
from the outlet.
Remove four screws
102
mounting the plate
3
by pulling it away from the body until it
automatically releases from the catches. Before setting the plate aside remember to