6
HDS4.1 Component Video Switch
HDS4.1 Component Video Switch
Step 1: Reset All Parameters to Factory Defaults
1 2 3 4
ZEKTOR
Start by pressing and
holding the Power
button...
1
2
...while continuing to hold the Power
button, press and hold both the ‘2’
and the ‘’ buttons.
After about 4 seconds, the display will flash
indicating all parameters have been restored
to their factory programmed values.
3
Resetting to Factory Defaults
If, for whatever reason, you’d like to reset your HDS4. back to its
factor y condition, this is easily done...
Step 1: Reset All Parameters to Factory Defaults
First press and hold the Power button
While continuing to hold the Power Button, press and hold
both the ‘2’ and ‘’ buttons.
After holding all buttons for about ‘4’ seconds, the display
will flash indicating all parameters have been restored to
their factor y programmed values.
1.
2.
3.
