Zektor HD1600-V2, Руководство пользователя

Страница: 16 / 46

16
HD1600V2 User Guide, Version 1.4, 10/30/13
Using the Front Panel
Assigning Zones to Source EDIDs
By default an EDID that uses the lowest common features of all zones is given to each source. This
screen allows you to override the EDID of an individual source by combing the EDIDs of all the
assigned zones, and using it as the new EDID of the source.
For more information on EDID settings refer to the section: “EDID” on page 20 .
To assign zones to a source:
If the LCD display is not at showing the main menu press the
MENU
button.
Use the
SELECT
knob to select the “Assign EDID zones” option:
Setup > ESet
Use the
ZONE
buttons to switch between sources.
Use the
SELECT
knob to scroll to a zone, and the press the
SELECT
to assign or unassigned a zone.
A zone is assigned when the small square to the left of the zone number is filled in.
A source that has no zones assigned is the same as a source that has all of it’s zones assigned, in
both cases the default EDID is used for that source.
Once all changes are made, pressing the
MENU,
or either of the
ZONE
buttons, or scrolling to the
SET
option will cause the new EDID to be sent to the source.
Src: 1 SET
Zone: o1{o2}o3 o4 o5 o6
SELECT
MENU ZONE
SETTING
NEXT BACK