Zeizz Primo Star, Руководство по эксплуатации, Страница: 20 / 306

Carl Zeiss Start-Up and Operation Primo Star / Primo Star iLED
20
M60-2-0011 v 08/2008
En
g
lish
Primo Star:
•
Loosen the set screw (Fig. 13/ 8 ) at the rear of the device and pull the connector (Fig. 13/ 5 ) of the plug-
in power unit (Fig. 13/ 6 ) out of the connection socket (Fig. 13/ 7 ) of the microscope.
•
Insert the connector of the plug-in power unit into the connection socket of the battery supply unit
(Fig. 13/
4 ).
•
Insert the connector of the battery supply unit (Fig. 13/ 2 ) into the connection socket (Fig. 13/ 7 ) of the
stand and tighten the set screw (Fig. 13/ 8 ).
•
Insert the plug-in power unit (Fig. 13/ 6 ) into a power outlet.
3.1.4 Switching the microscope on / off
Primo Star:
•
Switch on the microscope with the rotary knob (Fig. 5/ 5 ) and adjust the illuminator to the desired
intensity.
The selected intensity is indicated in five steps by the blue light-emitting diodes (Fig. 16/ 6 ) arranged on
both sides of the stand.
•
After finishing work, switch off the microscope with the rotary knob and cover it with the dust cover.
•
The smoothness of the coarse focusing drive (Fig. 16/ 25 and Fig. 17/ 30 ) is factory-adjusted, but you
can readjust it when required.
Primo Star iLED:
For transmitted-light applications:
Always turn the transmitted light / reflected light changeover switch first upward and then to
the desired position. By using force to turn it downward the reflected-light illuminator will be
damaged.
•
Turn the transmitted light / reflected light changeover switch (Fig. 17/ 5 ) upward to the transmitted-
light position ( Brightfield ).
•
Switch on the transmitted-light illuminator using the rotary knob (Fig. 17/ 10 ) and adjust the desired
illumination intensity.
The selected illumination intensity for transmitted light is indicated in five steps by the blue light-emitting
diodes (Fig. 17/
9 ) arranged on both sides of the stand.
For reflected-light applications (fluorescence):
Always turn the transmitted light / reflected light changeover switch first upward and then to
the desired position. By using force to turn it downward the reflected-light illuminator will be
damaged.
•
Turn the transmitted light / reflected light changeover switch (Fig. 17/ 5 ) upward to the reflected-light
position ( Fluorescence ).
•
Switch on the reflected-light illuminator using the rotary knob (Fig. 17/ 6 ) and adjust the desired
illumination intensity.