Zeiss Transillumination top 450 mot., Руководство по эксплуатации, Страница: 17 / 18

Operation
Transillumination top 450 mot. Switching on Carl Zeiss
08/2012 435500-9000-701 17
4.2 Switching on
Adjust the antiglare shield correctly to avoid eye injuries.
The position of the limit switch for the focusing drive must be checked prior to the first-time
use of the transmitted illumination adapter and reset if necessary (see AxioZoom.V16 operating
manual, Section
Adjusting the range of travel of the motorized focusing drive
) to avoid
collisions during the focusing movement.
•
Switch on the microscope system via HIP or on the SYCOP.
•
Switch the transillumination top by pressing the on/off button (Fig. 4/ 5 ) on the rear side.
•
Select the desired magnification on the microscope and adjust the focus as necessary.
•
Select the illumination method for transmitted light on the
Mode
keypad. Open
Shutter
as necessary.
If a Foot switch S is connected, it can be used to switch the illumination of the trans-
illumination top alternately on/off.
4.3 Switching off
•
Switch off the transillumination top by pressing the on/off button (Fig. 4/ 5 ).
•
Switch off the microscope system on the HIP or all units jointly with SYCOP.