ZEISS
SWITCHING ON SAFELY
SYCOP 3
10
435611-6044-008
09/2017
Englis
h
10
SWITCHING ON SAFELY
Check that the microscope system has been
correctly set up and connected.
All transport locks are properly removed.
Switch on all the light sources and illuminators
existing in the system. In so doing, follow the
separate operating instructions of each device.
Now, all components can be switched on
according to the operating manual of the main
device.
•
Before switching the device on, check that the
joystick on the SYCOP 3 is in zero position and
that the footswitch, if any, is freely accessible.
•
Set the
Power
switch at the back of the EMS 3
controller to position
I
. If necessary, briefly press
the button (standby) on the front of the EMS
3 controller.
The system will be switched on and will initialize
(Fig. 3).
If a motorized stage is connected, a stage
initialization query will appear (Fig. 4).
−
If the
button is pressed, initialization
will be performed immediately.
−
If the
button is pressed, initialization
will be stopped and may be carried out later.
When the initialization is completed, the
Home
home page (Fig. 5) will appear.
The system is ready for subsequent configuration.
Further options for setting user-dependent
parameters can be found in the main operating
manual.
Fig. 3
Initialization Screen on the
Touchscreen
Fig. 4
Stage Initialization Query Window
Fig. 5
'Home' Home Page (System
Unconfigured)
