Zeiss Smartzoom 5, Быстрое руководство

Страница: 21 / 34

3 Referencing Tasks | 3.8 Stitching Referencing ZEISS
10. Move the center of position 3 to the center of the crosshair by dragging the image with the
mouse. Examples of correct and incorrect centering of the cross positions to the crosshair
you will find in chapter 4.4, Best Practice: Image Alignment.
11. Click on the Continue button.
3.8 Stitching Referencing
This referencing task will find the best settings to minimize staircase offset in the stitching applica-
tion. Therefore a new version of the alignment sheet (2294-728) is required, which can be or-
dered on the Smartzoom software download page.
Prerequisite ü
Before starting the stitching referencing task, the task Image Alignment [
}
18] has to be per-
formed.
1. The stage moves now to the stitching referencing sample.
2. Focus the sample (via Autofocus or Manual Focus).
3. If necessary, move the live image with your mouse and drag the black sample point into the
green frame.
4. Wait till the green cross is in the center of the black sample.
Quick Guide ZEISS Smartzoom 5 | en-US | Rev.1 21