Zeiss Smartzoom 5, Быстрое руководство

Страница: 18 / 34

3 Referencing Tasks | 3.7 Image Alignment ZEISS
19. Tilt the stand upright again.
After the referencing of the pivot point the wizard will continue with the next activated step.
3.7 Image Alignment
This referencing task will perform image alignment. Therefore a DIN A4 print out of the coordi-
nate system alignment sheet is required.
1. Place the alignment paper (rear) on the stage. Notice that for this tasks the angle-stops of
the stage insert plate must be facing down .
2. Mount the displayed objective. If the window shows “ Mount the objective with the
highest magnification, but not necessarily the 10x ” use the 5,0x or 1,6x, if possible.
Ensure that the stand is in upright position.
Quick Guide ZEISS Smartzoom 5 | en-US | Rev.1 18