Zeiss S8, Инструкция по эксплуатации

Страница: 98 / 148

98
Operation
G-30-1346-en S8 Floor Stand Issue 4.0
Printed on 05. 06. 2001
OPMI
®
VISU 150 / 200: setting the lamp brightness
This control function permits you to select the brightness of the lamp.
OPMI
®
VISU 150 and OPMI
®
VISU 200 are equipped with two illumina-
tion systems: lamp 1 and lamp 2. In the basic mode, the current bright-
ness setting of lamp 1 is displayed in the top display. The middle display
shows the current brightness setting of lamp 2.
Changing the settings
Use the "
∇
" and "
∆
" keys to change the brightness of the lamps.
The brightness can be adjusted in a range from 0.1 to 1.5 in steps of 0.1.
At brightness level 1.0, a beep is emitted. The illumination intensity of
level 1.0 corresponds to 500 mW/cm
2
sr as per the future ISO standard.
Acoustic signals in OPMI
®
VISU
A beep is emitted:
– after the ceiling mount (floor stand) has been switched on, if the bright-
ness of one lamp has been set to level 1.0 or higher.
– during adjustment of the lamp brightness, when brightness level 1.0
has been reached.
Saving parameter settings
As soon as you have entered a parameter setting, it is saved under the
current user ID.
Path: The basic mode is automatically displayed after the instrument has
been switched on.
Basic mode
MODE STORE MANUAL
USER
1
1
0.7
2
0.7