Zeiss Lightsheet Z.1, Руководство по эксплуатации

Страница: 311 / 427

CHAPTER 4 - SYSTEM OPERATION
Lightsheet Z.1 Left Tool Area and Hardware Control Tools Carl Zeiss
02/2013 000000-1790-528 141
In either case, the other loaded image does not play a role. In the
coefficient table
the channel (
Ch
)
assignment column is replaced by an identity ( Id ) column that numbers the channels in their ascending
order starting with 0.
The assignment table represents the selected image,
either
Input image ( Input 2 check box inactive) or
Input image 2
(
Input 2
check box ticked).
Note that the dimensionality must not be the same as in
the
coefficient
table. The
assignment table
lists the
channels ( Ch ) and the laser lines used ( Laser ). With the
identity (
ID
) drop down menu (Fig. 228), an ID from the
coefficient table can be assigned individually to a
channel. That channel will then be corrected exactly with
the coefficients of that
ID
.
If no alignment should be performed do not align can be chosen.
The channel alignment tool is generically programmed to have high flexibility. Care should
therefore be exerted in the control which channels are how aligned as there are no warnings, if
unrelated channels are aligned to each other.
Fig. 228 ID drop down menu