Carl Zeiss
Axiolab A
1-12
06/99 B 40-015 e
1.4
Function Elements
(see Fig. 1-5, after this table)
Item
Designation
Purpose/description
1
Stand
Module base of the Axiolab A microscope
2
6 V, 30 W reflected-light
halogen illuminator
Reflected-light illuminator with 6 V, 30 W halogen lamp
3
Reflected-light illuminator H
Carrier element for the binocular tube and the illuminator; also used to
accommodate various technique sliders
4
Camera port
Enables (after removal of the dust cap) the connection of various
adapters for attachment of photomicrography/videomicroscopy
equipment (35 mm cameras, video cameras)
5
Binocular tube
Binocular viewing tube permanently attached to the reflected-light
illuminator H; can be set to the user's individual interpupillary distance;
after removal of the dust caps, dia. 30 mm eyepieces - one of which is
adjustable (foc) - can be inserted.
6, 7
Eyepiece, right and left
Fixed and adjustable (foc) eyepiece; the fixed eyepiece must be
assigned to the less myopic eye; two focusing eyepieces are required if
reticles or photo reticles are used.
8
Dust protection slider
(2 pcs.)
These two dust protection sliders should always remain in the
Axiolab A microscope; technique sliders can also be inserted only if
transmitted-light equipment is available
9
Objective nosepiece
Carrier for the maximum of 5 objectives which are swung into the
beam path manually
10
Specimen stage, fixed
Stage area: 160
×
140 mm; for the maximum specimen height of
- 20 mm (stage attached at upper stop) or
- 45 mm (stage attached at lower stop)
Two spring clips (supplied) enable specimens attached to a 26
×
76 mm
slide to be held in position (also see item 31)
11
Coaxial coarse and fine drive, L
Permits the specimen stage to be lifted and lowered within a travel
range of approx. 20 mm (also see section 1. 6 (7));
used for specimen focusing; mechanical unit together with item 29
12
Connecting cable for 6 V
30 W reflected-light illuminator
Must be connected to the sockets at the instrument rear to allow
operation of the reflected-light illuminator
13
”A/D” illumination converter
Permits the switchover between incident light and transmitted-light
when instruments with an additional transmitted-light equipment are
used.
Содержание Axiolab A
