![background image](http://html2.mh-extra.com/html/zeiss/axio-zoom-v16/axio-zoom-v16_operating-manual_3350140030.webp)
SET-UP
Carl Zeiss
Mounting the reflected light illumination
Axio Zoom.V16
30
435080-9030-701
05/2012
3.8.2
Attachment with carrier and holder (M8 tapped hole)
The following reflected light illuminators are attached with M8 tapped holes:
−
Flexible light guide with focusing attachment
−
Surface light
−
Line light S
M8 tapped holes are located on the
stand bases (both sides of column), on
both sides of carrier S and on the
nosepiece (see also Section 2.3,
page 12).
Light bracket S
4
)
•
Screw light bracket S (Fig. 19/
4
) into the tapped
hole on the stand or carrier/nosepiece either
directly or using spacer S (Fig. 19/
5
) and
tighten. To do this, insert the socket wrench SW
3 into the through-hole of the light bracket S or
spacer.
•
Screw clamp S (Fig. 19/
2
) on the underside of
the light bracket S tightly.
•
Insert focusing attachment (Fig. 19/
1
) into
clamp S and secure with the knurled screw
(Fig. 19/
3
).
•
Insert the light guide into the focusing
attachment and secure; connect to the cold
light source (see Fig. 16).
Articulated arm S
6
)
•
Mount the reflected light illuminators
analogously to the light bracket S.
Instead of clamp S, the surface lamp or
line light are secured to the light
bracket or articulated arm S using the
enclosed adapter M8/M6.
Fig. 19 Mounting the focusing attachment
with light bracket
Содержание Axio Zoom.V16
Страница 1: ...Operating Manual Axio Zoom V16 Zoom microscope...
Страница 2: ......